螺耐斯环保(多图)-莫诺螺杆泵配件

Ｂ、转子B， rotors转子的结构也非常简单，主体是钢制杆件，一般外涂耐磨耐蚀的铬合金材料。其作用是传递动力和写定子形成密封腔。The structure of the rotor is also very simple， the main body is steel rod， generally coated with abrasion resistant and corrosion resistant chromium alloy material. Its function is to transfer power and write the stator to form a seal cavity.Ｃ、回转筒C， rotary barrel回转筒也就是一根内径较大的油管或空心定子筒，接在定子的上部以给转子和抽油杆杆柱以较大的回旋空间，防止转子和抽油杆因偏心运动磨擦磨损油管。A rotary cylinder is also an oil tube or hollow stator barrel with larger inner diameter. It is connected to the upper part of the stator to provide larger swirl space for the rotor and sucker rod string， so as to prevent the rotor and sucker rod from attrition wear due to eccentric wear.



Ｄ、限位器D， limiting device限位器为一个底部带限位板和流通通道的短节，接在定子的尾部，其作用是施工作业时给转子限位以防止下入过头而失去作用和杆柱脱落时防止杆柱掉入井底。The limiting device is a short section with bottom limit plate and distribution channel， which is connected to the tail of the stator. Its function is to limit the rotor to the rotor during ctruction1， so as to prevent it from falling into the overhead and lose its function and prevent the rod from falling into the bottom when the rod string falls off.



 由于吸液管道或者轴封的地方有泄漏会导致空气被吸入到单螺杆泵里面，这样单螺杆泵就会处于吸空气的状态，莫诺螺杆泵配件，进口管道不能形成负压所以螺杆泵吸不上液体。处理方法是检查、修理管道，排除杂物，调整更换轴封。    单螺杆泵电机反转也会导致螺杆泵吸不上液体的现象出现，调整电机的极性接头就可以了。    抽吸的矿浆太干，或在半干状态下运转也是螺杆泵吸不上液体的原因，这种情况只能稀释或向进料口加入充足的矿浆。    输送的液体粘度太高也会导致螺杆泵吸不上液体，如果是液体粘度太高的问题只能降低螺杆泵的转速然后提高液体的温度后使其粘度降低或者改用立式螺杆泵。



螺耐斯环保(多图)-莫诺螺杆泵配件由武汉螺耐斯环保设备有限公司提供。“螺杆泵,单螺杆泵,螺杆阀,污泥切割机,污泥破碎机,微型螺杆泵”选择武汉螺耐斯环保设备有限公司，公司位于：湖北省武汉市蔡甸区奓山街工业园，多年来，螺耐斯坚持为客户提供好的服务，联系人：尤经理。欢迎广大新老客户来电，来函，亲临指导，洽谈业务。螺耐斯期待成为您的长期合作伙伴！