编程单个SB8F
在对传感器盒进行编程之前，请确保有线输入处于所需配置（开/关）以启用输出。按下AUTOSET按钮并按住3秒钟，直到READING红灯开始闪烁，然后松开。红灯（READING）闪烁表示微处理器正在读取和存储全部输入的状态。然后红灯熄灭，启用了输出。黄灯（STORED）指示启用输出。
Before programming the sensor box， make sure that the wired inputs are in the confguration (ON/OFF) desired to enable the output. Press the AUTOSET button and hold it down for 3 seconds until the READING red light starts fashing， then release it.The red light (READING) fashing indicates that the microprocessor is reading and storing the state of all the inputs. Then the red light goes off and the output is enabled. Output enabling is indicated by the yellow light (STORED).
3-jaw self-centring electric gripper
? Plug & p1ay user friendly gripper.
? No electricity con5umption when gripper is engaged.
? No programming required.
? Gripper retention guaranteed in event of blackout.
? Self Adapting jaws part.
? Long life Brushless motor (Brushless DC).
? Built-in motor driver.
? 24 Vdc Low Voltage Power Supply.
? M8x1，真空泵哪家好， 3 poles standard connection.
? Controllable by PLC as a pneumatic valve.
? Fiber-carbon gear reduction.
? 10 milion cycle maintenance-free.
? T-slot style jaws for heavy loads.
? Weight-dimensi0n5-force best trade off.
? Rotary actuator fitting compatible.
? Optional magnetic sensors.
配置和指标
?S1：实现选择输出信号的类型，莱芜真空泵，PNP（P/2）或NPN（N）。
?S2：分别根据NPN或PNP选择（通过S1）实现选择内部PULLUP（PU）或PULL-DOWN（PD）电阻器。
?L1：通电时为绿色。
?L2：当常闭系列输出切换时为琥珀色（例如：全部触点打开）。
?L3：当切换常开系列时琥珀色（例如：全部触点闭合）。
?S1: enables the selection of the type of output signal， PNP(P/2) or NPN (N).
?S2: enables the selection of internal PULL-UP (PU) or PULLDOWN(PD) resistors depending on the NPN or PNP selection(via S1)， respectively.
?L1: green when powered.
?L2: amber when the NC series output is switched (e.g. allcontacts open).
?L3: amber when the NO series is switched (e.g. all contactsclosed).
吉玛泰克自动化(图)-真空泵小型-莱芜真空泵由吉玛泰克自动化工程（常熟）有限公司提供。“机械手前端治具，真空系列，传感器，机电一体化组件”选择吉玛泰克自动化工程（常熟）有限公司，公司位于：江苏省常熟市古里镇通华路1号2幢，多年来，吉玛泰克坚持为客户提供好的服务，联系人：吴琦。欢迎广大新老客户来电，来函，亲临指导，洽谈业务。吉玛泰克期待成为您的长期合作伙伴！