洛阳旋转装置-机械旋转装置-吉玛泰克(推荐商家)

3-jaw self-centring electric gripper

? Plug & p1ay user friendly gripper.

? No electricity con5umption when gripper is engaged.

? No programming required.

? Gripper retention guaranteed in event of blackout.

? Self Adapting jaws part.

? Long life Brushless motor (Brushless DC).

? Built-in motor driver.

? 24 Vdc Low Voltage Power Supply.

? M8x1， 3 poles standard connection.

? Controllable by PLC as a pneumatic valve.

? Fiber-carbon gear reduction.

? 10 milion cycle maintenance-free.

? T-slot style jaws for heavy loads.

? Weight-dimensi0n5-force best trade off.

? Rotary actuator fitting compatible.

? Optional magnetic sensors.

SB系列传感器接线盒

? 用于EOAT上传感器接线。? 可以转换PNP和NPN信号。? Is/Os可以是拉电流（PNP）、灌电流（NPN）或干触点。? 可以串联多个盒子来控制更多传感器。? 输入信号重复LED，便于排除故障（不适用于SB15）。? 提供应变消除装置和固定至型材的套件。

Connection boxes for series SB sensors? Used for sensor wiring on EOATs.? PNP and NPN signals can be converted.? Is/Os can be current sourcing (PNP)， sinking (NPN) or dry contact

Several boxes can be connected in series to control more sensors

Input signal repetition LED for easy troubleshooting  (not for SB15).

Provided with strain reliefs and kit for fastening to profles.

夹具订制

AGG可在机械手和模具间提供精i准的中心。

注塑模具内金属嵌件安放时尤其要注意这一点。

夹具AGG...B 安装在EOAT上，气动旋转装置，钢管 AGG...C 安装在模具上。

一旦机械手向模具靠近，夹具在压力的作用下逐步向钢管靠近，洛阳旋转装置，

并与之接触。

AGG21-B 和 AGG30-B 采用的是双动作安全弹簧，确保在压缩空

气 (NC)缺失时设备的正常运行。

AGG19-B 采用的是单动作复位弹簧(NO)。

Gripper for engagement

The AGG is used to provide a precise centering between the robot

and the mould.

This necessary when metal inserts must be p1aced in the

mould， before the p1astic injection.

The gripper AGG…-B is fitted on the EOAT， while the steel bushing

AGG…-C is fitted on the mould.

Once the robot has approached the mould， the gripper is

pressurized， thus it closes and engages the bushing.

AGG21-B and AGG30-B are double-acting with a safety spring to

keep the gripper engaged even without compressed air (NC).

AGG19-B is single-acting with reset spring (NO).